Hello, welcome to the official website of Guangzhou Zhengying Titanium Products Co.Ltd!

PRODUCT SHOWCASE

钛包铜3
1b979c935d8d6e1b1e870f5edc324d7
22f14519cf4c6e01febcacc458e5c79
50b8b3681853d3cf808e6f71841f4d9
8b34e56273cb51eaad67e4bfffcdec2
e78da40da181610357a1b46ef935b91
钛包铜1
2880296b194933a6335bd7b1c098eed

Titanium Clad Copper

钛包铜3
1b979c935d8d6e1b1e870f5edc324d7
22f14519cf4c6e01febcacc458e5c79
50b8b3681853d3cf808e6f71841f4d9
8b34e56273cb51eaad67e4bfffcdec2
e78da40da181610357a1b46ef935b91
钛包铜1
2880296b194933a6335bd7b1c098eed
Product Description

Product Features

  1.  The ratio of anode and cathode can be controlled effectively.
  2.  Good solubility of anode, less anode sludge.
  3.  Easy to replenish and load/unload anode materials.
  4.  Safe use of anode material, saving energy consumption.

Usage

  1. Titanium conductivity is poor, generally in the water outside the hook energized current is not more than 0.26A / m ㎡, the hook in the water energized current is not greater than 1.5A / m ㎡, otherwise the hook body heat, resulting in higher liquid temperatures, increased refrigeration, waste of electricity, or even due to heat damage to the plastic tank. Found that the hook body is obviously hot, can increase the number of titanium blue or increase the cross-section size of the hook to improve the conductive effect of titanium blue.
  2. Titanium blue hooks and electrodes generally do not use flat or round contact, because it is easy to cause poor contact, so that the electrode produces spot corrosion.
  3. Titanium blue mouth should be slightly higher than the liquid surface to prevent anode slag outflow.
  4. The lower end of the titanium blue should be higher than the plated parts 100mm~150mm, so as to avoid the lower part of the current is too concentrated, causing scorching.
  5. Titanium blue and anode should be in close contact, otherwise the anode potential on the titanium blue will rise sharply, so that the surface of titanium blue precipitation of oxygen and precipitation of chlorine reaction, resulting in damage to the titanium blue and the oxidation of additives.
  6. In order to prevent the plating layer from burrs, should be in the titanium blue outside the anode bag, because the anode bag is usually long-term use without removing, so it is recommended to use the “double bag” method. The anode bag should be wrapped tightly around the mouth of the titanium blue, leaving a gap of a few inside the bottom of the bag to store the anode mud that may be generated.
未找到相应参数组,请于后台属性模板中添加

CONTACT INFORMATION

No.16 bis, No.1 Street, Private Industrial Zone, Fulong Road, Shawan Town, Panyu District, Guangzhou, China

OFFICIAL ACCOUNTS

Welcome to our official public number

公众号二维码

ONLINE MESSAGE

Username used for comment:
客户留言
Description:
验证码