Hello, welcome to the official website of Guangzhou Zhengying Titanium Products Co.Ltd!

PRODUCT SHOWCASE

IMG_20210224_143521
IMG_20170915_172053
IMG_20221024_120208
00e077c1b8472ea13f0c048f9a1d258
f1cd62a9540407e3fec3aeee8475ae7
3aad7c031ee9cde9145e2d3653fe1c6
5e84e523f205e52f2244acdc2cc16d0
0347612230d79baefc4cf21644cba05
IMG_8031
IMG_7650

Round Titanium Basket

IMG_20210224_143521
IMG_20170915_172053
IMG_20221024_120208
00e077c1b8472ea13f0c048f9a1d258
f1cd62a9540407e3fec3aeee8475ae7
3aad7c031ee9cde9145e2d3653fe1c6
5e84e523f205e52f2244acdc2cc16d0
0347612230d79baefc4cf21644cba05
IMG_8031
IMG_7650
Product Description

Product Features

  1.  The ratio of anode and cathode can be controlled effectively.
  2.  Good solubility of anode, less anode sludge.
  3.  Easy to replenish and load/unload anode materials.
  4.  Safe use of anode material, saving energy consumption.

Usage

  1. Titanium conductivity is poor, generally in the water outside the hook energized current is not more than 0.26A / m ㎡, the hook in the water energized current is not greater than 1.5A / m ㎡, otherwise the hook body heat, resulting in higher liquid temperatures, increased refrigeration, waste of electricity, or even due to heat damage to the plastic tank. Found that the hook body is obviously hot, can increase the number of titanium blue or increase the cross-section size of the hook to improve the conductive effect of titanium blue.
  2. Titanium blue hooks and electrodes generally do not use flat or round contact, because it is easy to cause poor contact, so that the electrode produces spot corrosion.
  3. Titanium blue mouth should be slightly higher than the liquid surface to prevent anode slag outflow.
  4. The lower end of the titanium blue should be higher than the plated parts 100mm~150mm, so as to avoid the lower part of the current is too concentrated, causing scorching.
  5. Titanium blue and anode should be in close contact, otherwise the anode potential on the titanium blue will rise sharply, so that the surface of titanium blue precipitation of oxygen and precipitation of chlorine reaction, resulting in damage to the titanium blue and the oxidation of additives.
  6. In order to prevent the plating layer from burrs, should be in the titanium blue outside the anode bag, because the anode bag is usually long-term use without removing, so it is recommended to use the “double bag” method. The anode bag should be wrapped tightly around the mouth of the titanium blue, leaving a gap of a few inside the bottom of the bag to store the anode mud that may be generated.
未找到相应参数组,请于后台属性模板中添加

CONTACT INFORMATION

No.16 bis, No.1 Street, Private Industrial Zone, Fulong Road, Shawan Town, Panyu District, Guangzhou, China

OFFICIAL ACCOUNTS

Welcome to our official public number

公众号二维码

ONLINE MESSAGE

Username used for comment:
客户留言
Description:
验证码